| The Model 455D control panel is used to operate
the following FAAC operators:
Swing Gate Operators:
 Model
415 (115 v version)
Model
400
Model
402
Model
422
Model
750
Model
760
Barrier Gate Operators:
Model
615
The 455D has the following functions and features:
Operates a single leaf or a bi-parting gate
Provides opening and closing "slow down, soft stop"
convenience
Power supply: 115 VAC (+/- 10%) or 230 VAC (+6% -10%) 50-60
HZ)
Absorbed power: 10W
Motor max load: 800W
Accessories max load: .5 amp
Electric lock max load: 15 Va
Operating temperature: -78oF to +131oF
Protection fuses: .800 mA (accessories) 5 amp (motors)
. Operating logics:
A (automatic): signal to open, gate closes
automatically after selected timed pause
S (security): similar to
A logic, useful in reducing tailgating
E (semi-automatic): garage
door-like operation; signal to open, signal to close
EP (semi-automatic): similar
to E logic, but second signal stops gate, third signal reverses
gate
B (manned, pulsed): designed
for guard station use, requires 3-button switch (pulsed) to
open, close and stop gate
C (manned, constant): similar
to B logic, but 3-button switch requires constant pressure
on each button
- Opening/closing time: 0 to 120 seconds
(programmable)
- Pause time: 0 to 4 minutes (programmable)
- Closing leaf delay: 0 to 4 minutes (programmable)
- Opening leaf display: 2 seconds (can be
disabled)
- Torque: adjustable from 0 to 50 levels
- On board programming via push button
(see circuit board photo this page)
- Panel also allows for the use of FAAC
Gate Coders, for “real time” tracking of gate
position
- Easy interconnection of actuating and
reversing devices.
Open/Hold open function
|
